The Mavic 3, Mavic 2 Pro, and the Phantom 4 Advanced, Pro, and Pro V2 are the consumer drones that DJI sells with variable apertures that range from f/2.8 to f/11. The Mavic 2 Zoom’s aperture actually varies as the zoom is engaged from f/2.8-f/3.8, but the actual size of the opening doesn’t change. 1388g (3.06 pounds) 350mm diagonally (13.7 inches) Approx 28 minutes flight time. Controller with flight and camera controls (optional touchscreen) 72kph (45mph) Front and rear collision detection Connect the remote controller to the computer using a USB-C cable (for the Phantom 4 RTK) or Micro USB cable (for the Phantom 4 Pro V2.0 / Phantom 4 Pro+ V2.0), then power on the remote controller and aircraft. The location and status information of the aircraft will display on DJI Terra. When using the Phantom 4 Pro V2.0, make sure to connect 6. Click the toggle to video/picture icon just above the record icon at least 3 times less than 5 seconds from 1st to 3rd time. 7. Click the video/camera settings icon just below the record icon. 8. With the settings opened, click the toggle video/picture icon as in step 6. Hello, I am currently using the Phantom 4 Pro Plus platform and am attempting to collect aerial images over a lake, including the shore around the lake. I have been using the drone's controller to select optimal camera settings for the flights. I noticed a setting option designated as "Water" under the White Balance options in the camera settings (along with "Sunny" and "Cloudy" and Go here: DJI Phantom 4 Pro – Specs, Tutorials & Guides – DJI, scroll down to Firmware and download the "Phantom 4 Pro+ Remote Controller Firmware v01.04.01.00 "; unzip the archive and you should have a big-a** .bin file (1.61 GB or so); 3. Copy that file (GL300E_v1410_20180412.bin) unto a microSD card and place it in your Controller. 4. PIX4Dcapture Pro is compatible with the following drones, cameras, and controllers: *1 - Network RTK corrections available. *2 - Cell tower and transmission tower assets not available. *3 - Compatible lens model for DJI Zenmuse X5S is DJI MFT 15mm/1.7 ASPH. *4 - Compatible lens model is DJI DL 35mm F2.8 LS ASPH. 4. Power the DJI Phantom 4. Insert the battery into the DJI Phantom 4 and turn it on. Wait a 1 or 2 seconds to start. As the IMU gets warmed up, immediately after you switched the Phantom 4 ON, tap at “Calibrate IMU” and start calibration right after the drone is connected to your mobile device. While previous Phantom Series drones were built around professional photographers and hobbyists, the Phantom 4 RTK was designed for industrial users for high-precision mapping and other data acquisition missions. While the Phantom 4 RTK shares a similar camera and form size, it also adds a RTK positioning module, a new TimeSync system, a KcgiXDP.

dji phantom 4 pro best camera settings